Your shop for E Bike tuning: bikespeed

The optional display for all bikespeed tunings for the Bosch Smart System allows to show all values correct, despite the fact that a tuning is installed. The display is clipped on the originalle Kiox 300 bracket. This can also be retrofitted if they are not present on your bike.

Display holder retrofit set for the bikespeed display or the Bosch Kiox 300.

A single-arm holder, a display mount with cable outlet at the bottom and a short cable to the LED remote are included. This set is for handlebar diameter 31.8 mm.

If you already have a holder for a Kiox 300 on your bike, this holder is not required to use the bikespeed display.

If a Systemcontroller is installed on your bike, it may be necessary to replace the cable from the motor to the Systemcontroller and the one supplied with longer ones, as the display holder is connected between the motor and the Systemcontroller.

Display holder retrofit set for the bikespeed display or the Bosch Kiox 300.

A single-arm holder, a display mount with cable outlet at the bottom and a short cable to the LED remote are included. This set is for handlebar diameter 35 mm.

If you already have a holder for a Kiox 300 on your bike, this holder is not required to use the bikespeed display.

If a Systemcontroller is installed on your bike, it may be necessary to replace the cable from the motor to the Systemcontroller and the one supplied with longer ones, as the display holder is connected between the motor and the Systemcontroller.

You can transport your bikespeed display or your Kiox 300 protected in the padded display bag with optional carabiner. The bag has a zipper to close.

The Spy 15 is a rearview mirror suitable for sporty rides. It is small and lightweight, discreet yet offers sufficient visibility behind.

Thanks to its simple installation with the silicone band, it can be quickly attached without the need for tools. It can be mounted in multiple locations on the bicycle (handlebars, fork, top tube).

The Z Eye is a rearview mirror that can be attached to many bicycle helmets using a hook-and-loop fastener. It is very lightweight and can be easily used on multiple bicycles due to its mounting on the helmet.

Thanks to the long pole with an adjustable tip, the angle of the mirror can be adjusted to the respective position, allowing for a clear view of what is happening behind, thus increasing safety while cycling.

A practical top tube bag with detachable smartphone pocket and approx. 1.35 litre volume. The bag weighs just 158 grams and is water-repellent and reflective.

The very louad (120dB) electro bell is a great option for your pedelec to make you sure to be heard by pedestrians. The installation is very easy done in a few seconds and no tools are needed. It is designed for 22mm up to 32mm handlebars. Of course the bell is waterproof.

The universal smartphone mount for every bike. Made in Austria. With Finn you can safely and easily mount your smartphone to any handlebar. Thanks to its simple design and high quality material, the mount withstands whatever you throw at it.
For every smartphone, fits any handlebar, fits in every pocket, made of high quality silicone, solid as a rock

This set contains the speed sensor, magnet and mounting material for the Rim Magnet Tuning for the Bosch Smart System.

This set is supplied with the tuning and only needs to be purchased in the event of loss or defect.

This adapter is required to adapt the bikespeed-RS or bikespeed-RSc to the Active- or Performance-Line motors of the Bosch Smart System with rim magnet.

The adapter is supplied with the tuning and only needs to be purchased in the event of loss, defect or bike change.

This adapter is required to adapt the bikespeed-RS or bikespeed-RSc to the CX motors from 4. generation (BDU37xx) of the Bosch Smart System with rim magnet.

The adapter is supplied with the tuning and only needs to be purchased in the event of loss, defect or bike change.

This adapter is required to adapt the bikespeed-RS or bikespeed-RSc to the CX motors from 5. generation (BDU38xx) of the Bosch Smart System with rim magnet.

The adapter is supplied with the tuning and only needs to be purchased in the event of loss, defect or bike change.

This adapter is required to adapt the bikespeed-RS or bikespeed-RSc to the SX motors of the Bosch Smart System with upper mounting (BDU3142 and BDU3143) with rim magnet.

The adapter is supplied with the tuning and only needs to be purchased in the event of loss, defect or bike change.

The chainring tool (also known as spider tool or lockring tool) is needed to loosen the chainring nut. This allows the chainring to be removed on bikes with Bosch Generation 3 and Generation 4 motors.

A standard 1/2" ratchet is also required for use.

Hexagonal ball head 5 mm Allen with a length of about 14 cm.

With this sprocket remover made from a chrome-vanadium steel alloy for Shimano freewheels with a 6 mm hollow axle, you can mount and dismount pulleys or gear cassettes. The locking pin securely fixes the remover, making it easier to use in a vice. Without a vice, the tool can also be used with a 1/2" ratchet or a 21 mm open-end wrench.
The tool is suitable for Shimano and SRAM sprockets with locknuts and center-lock rings.
It is not suitable for hubs with solid axles.

Universal spoke magnet for all spokes.